Cisco VPN3030 with ACS 3.1 cannot assign static routes to VPN clients

[lganeva]

Hi,

My problem is that the usage of cisco-pix attribute

ip:route=dest mask gw

the static route specified in the above command is not applied to VPN clients, connectied to the VPN server. The same av-pair works fine with access-lists which are assigned to VPN clients.

Any help would be greatly appreciated.

BR,

Lora

[nikhil_m]

By mentioning "Not applied", do you mean that it does not show up in config?

[lganeva]

Hi,

I mean that they do not appear in the routing table of the clients and they cannot access the network destinations that are accessible wia these routes.