cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1075
Views
0
Helpful
1
Replies
steve switzer
Beginner

Cisco Work failing to deploy passwords

Hi All

When trying to deploy new passwords to switches via Cisco Works

we get the following error message -

ERROR:RME_CDL1031:Transport session to device failed TFTP: failedCould not detect protocols running on the device

We can talk to said device with telnet ssh etc and cisco works brings up the device

centre so what is the problem - any ideas

Steve

1 REPLY 1

Hi All

When trying to deploy new passwords to switches via Cisco Works

we get the following error message -

ERROR:RME_CDL1031:Transport session to device failed TFTP: failedCould not detect protocols running on the device

We can talk to said device with telnet ssh etc and cisco works brings up the device

centre so what is the problem - any ideas

Steve

Hi Steve,

As  Ciscoworks RME under the heading of administration. In this section navigated to RME Device Attributes - tftp timeout settings.  change to settings from:

TFTP timeout 5 seconds

to

TFTP timeout 30 seconds

Hope to help !!

If helpful do rate the post

Ganesh.H

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel