06-19-2010 11:58 PM - edited 03-10-2019 05:12 PM
I have upgraded CiscoSecure ACS from 4.1 to 4.2, I have CiscoSecure ACS UCP application running which was configured at the installation of ACS 4.1, so do I have to changed the UCP Application or it will work fine?
I have check database replication logs its says "Cannot replicate to 'wirelesspwd' - server not responding"
Thanks,
Almas Saiyed
Solved! Go to Solution.
06-20-2010 11:39 AM
Both should be running on the same version so If you upgraded ACS version then you have to upgrade the UCP version too.
Installation guide of UCP 4.2
Regards,
Jatin
Do rate helpful posts-
06-20-2010 11:39 AM
Both should be running on the same version so If you upgraded ACS version then you have to upgrade the UCP version too.
Installation guide of UCP 4.2
Regards,
Jatin
Do rate helpful posts-
06-22-2010 10:28 PM
Ok,
I will upgrade it too.
Thanks,
AS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide