About Almas Saiyed

Almas Saiyed · 04-09-2017

Dear All, I am facing a strange issue while configuring Cisco WLC 5520 and Cisco 3850 switch. I have assign IP address 192.168.66.1/24 to WLC Management and untagged it. Created vlan 66, create SVI assigned IP 192.168.66.254/24. WLC is connected on...

Almas Saiyed · 10-24-2016

Dear All, I have 235 APs in the campus. I have 3 WLC appliance(2x4402 and 1x4404) with 200 APs license and a vWLC with 50 APs license. 4400 series appliance have image version 7.0 and vWLC have image version 8.0. All WLCs are in the same mobility gro...

Almas Saiyed · 12-01-2015

Dear All, I want to configure QoS for my VC system (Protocol used is h.323). Please advise me to configure QoS step by step. I have attached a diagram. Thanks, AS

Almas Saiyed · 11-01-2014

Dear All, We are planning to buy new routers. We have 2 ISP which should be terminated to a router(now we have 2 router for each ISP), ISP1 speed 75 Mbps and ISP 2 speed 45 Mbps. I want to use both ISP silumteniously with HA.Which router is suitable ...

Almas Saiyed · 09-19-2014

Dear All,How to configure external database in ACS 4.2 appliance for Windows Active Directory.Active Directory is configured in Windows 2012.ACS internal database is working fine without interruption.What configuration is requred to configure externa...

Almas Saiyed · 04-14-2017

thanks Rasika, ' it is already disabled. I have attached sh run of 3850. version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname Switc...

Almas Saiyed · 10-26-2016

Thanks Sandeep, Where should I enable this? on vWLC or on 4400 series WLC appliance. Thanks, AS

Almas Saiyed · 10-26-2016

No where, APs should not work until vWLC comes up again. APs must join vWLC only.

Almas Saiyed · 10-25-2016

Thanks Leo, I have done following 2 steps: 1. Enabled Global AP Failover Priorty under AP Failover Priority. 2. Configured Back-up Primary Controller IP and Back-up Primary Controller name and also configured Back-up Secondary Controller IP and Back...

Almas Saiyed · 12-14-2015

Dear Richard, Thanks for update. VLAN 10 does not have only VC traffice. But we can create new VLAN for VC. Please suggest. Thanks, AS

Member Since	‎09-16-2009 10:54 PM
Date Last Visited	‎02-22-2018 07:31 PM
Posts	70

User Statistics

User Activity

Cisco WLC 5520 management IP address issue with Cisco 3850

An AP must join a specific WLC

Help configuring QoS on 6506-E, 3750 and 2960 for VC System (h.323)

which router to buy

ACS 4.2 appliance external database configuration with AD

thanks Rasika, '

Thanks Sandeep,

No where, APs should not work

Thanks Leo,

Dear Richard,