02-04-2019 04:38 PM
Hello folks,
I ran into an issue where I'm checking for the latest/up-to-date windows patches using BMC Software Patch Management (Policy > Policy Elements > Condition > Patch Mgmt Condition) and latest Symantec Anti-Virus definitions ((Policy > Policy Elements > Condition > Anti-Virus Condition).
The problem is, patch management works with Compliance Module 4.x and Anti-Virus works with 3.x.
Question is:
[1] Do I have to create two separate AnyConnect Configuration files for Posture?
[2] I'm also deploying AnyConnect and Posture Modules throughout our organization, do I have to bundle both 3.x and 4.x version together with AnyConnect Client software and then deploy it on all the endpoints?
I'm just confused, how two different versions of Compliance modules will run together for different purposes (Patch management and AV).
Thank you
Ain
Solved! Go to Solution.
02-04-2019 09:15 PM
You have to use either 3.x or 4.x for your network.
If you are using 4.x then for antivirus you need to use antimalware condition
If you are using 3x. then you need to use antivirus condition.
Check below link (End-of-Life Dates for Legacy AnyConnect ISE Compliance Module 3.6.x.x and Earlier)
02-04-2019 08:42 PM
02-04-2019 09:15 PM
You have to use either 3.x or 4.x for your network.
If you are using 4.x then for antivirus you need to use antimalware condition
If you are using 3x. then you need to use antivirus condition.
Check below link (End-of-Life Dates for Legacy AnyConnect ISE Compliance Module 3.6.x.x and Earlier)
02-05-2019 11:21 AM
Thank you sir for helping me out. Appreciate it.
Ain
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide