Configure AAA with Win2k Radius Server

[jpac]

Hi all!

My NAS is a Cisco 2610 (for remote dial-in users). I am attemting to configure IAS on a Win2K Domain Controller. Any clues to correctly configure both the radius client and server and have AAA work properly?

Thanks in advance.

JPac.

[gfullage]

There shouldn't be anything different on teh NAS itself, just the standard AAA Radius commands.

Here's a sample config for VPN clients coming into a PIX.

http://www.cisco.com/warp/public/110/cvpn3k_pix_ias.html

The commands on the PIX are standard, so they will be on the router also. The only difference between the VPN client and a PPP client is that you could probably select CHAP and MS-CHAP under the Authentication tab on the IAS server.

[jfinklea]

You will find some very helpful information in "Cisco - Configuring Cisco IOS and Windows2000 for PPTP Using Microsoft IAS". It's available on Cisco's site. This is a fairly easy project. Shouldn't take more than an hour or so. One caution, make absolutely sure your pre-shared keys are the same.

Have fun!

Jack.

[jpac]

Thanks Glenn and Jack for your input and help. It works fine for pap now but cannot have it working with chap authentication. Wonder if the hiccup is at the clients' level or else?

Any idea?

Regards.

JPac.