09-27-2018 12:43 PM
Hi,
I am trying to copy a file from an ISE node to a server i have attempted to use scp but i keep getting an error "% Error: invalid url"
below is the command i am using to perform the copy through the ISE nodes cli.
copy disk:/corefiles/xxxxxx.gz scp://admin:password@192.x.x.x/xxxxxx.gz
Please let me know if you have done this before or if there is a mistake in my synthax.
Solved! Go to Solution.
09-28-2018 04:35 AM
SFTP as well:
SVPISEA01/admin# copy disk:/catalina.out sftp://10.200.150.58/ISE Username: username Password: SVPISEA01/admin#
09-27-2018 01:39 PM
I would guess SCP is not supported. I know FTP works:
copy disk:corefiles/hs_err_pid13001.log.gz ftp://10.9.92.123/
Username: cisco
Password:
You can't specify the username and password in the command.
09-28-2018 04:35 AM
SFTP as well:
SVPISEA01/admin# copy disk:/catalina.out sftp://10.200.150.58/ISE Username: username Password: SVPISEA01/admin#
09-28-2018 04:36 AM
03-18-2022 02:06 AM
HI,
i have the same error and i'm not able to export a file from ise disk to my pc or any folder because i'm given these errors, what can i do?
ISE/admin# copy disk:/PrimaryAdmin.tar.gz sftp://x.x.x.x/Repo-BCK
Username: admin
Password:
% Error : Operation failed due to one of the following reasons
1. host key is not configured
2. host key is removed because of re-image
3. host key is removed from some other repository having same ip/hostname
% Please add the host key using the crypto host_key exec command
% Error: Transfer failed
i have one repository already configured but i need to move the file "PrimaryAdmin" to my desktop, any tips?
thank you
03-18-2022 02:32 AM
Hi @MaErre21325 ,
please take a look at: Configure Repository on ISE, special attention to "add the host key" and also at Backup and Restore Operations, special attention to "Create Repositories"
Hope this helps !!!
03-18-2022 03:17 AM
hello @Marcelo Morais ,
the repository is already configured and works when moving a file from the repository to the ise disk, but in this case i need the revers action: moving a file from disk to the repository (or to my desktop) and it fails
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide