Crowdstrike agent for posture assessment & integration with Cisco ISE 3.0

[salman.almakky]

Instead of AnyConnect client to do endpoint posture assessment, can Crowdstrike agent be used to do endpoint posture assessment with ISE 3.0?

[Mohammed al Baqari · Accepted solution]

Hi,

No you cannot use crowdstrike to perform posture. You either use anyconnect
posture agent or agentless posture. You can verify if crowdstrike is
installed on the machines.

Agentless posture example

https://community.cisco.com/t5/security-documents/how-to-agentless-posture-configuration-validation-amp/ta-p/4152763

***** please remember to rate useful posts

#- Please type your reply above this line -##

[thomas · Accepted solution]

No, CrowdStrike is not an official Cisco Security Technology Alliance (CSTA) Partner.

[dpfau]

Hi all, sending an update to this older thread because CrowdStrike has since been added to the CTSA https://cisco.com/go/csta

[karimboroumand]

https://www.cisco.com/c/en/us/products/security/technical-alliance-partners/crowdstrike.html

[ys1338001]

This has changed since the author posted. CrowdStrike is now in the CSTA. There are integrations available for pulling endpoint data from the CrowdStrike agent.