cwa url-redirect does not work

[Imran Ahmad]

Hello experts,

I have ise with WLC , i m configuring CWA for wireless guest users.   the issue is, while i try to connect to Guest-Wifi and try to open a brower to be redirected to my ise guestportal,  but it is geting redirected.

What can be the issue ?

[Bastien Migette]

Hello Imran,

Your issue is not really clear, you are redirected ???

Anyway, here is a config example for WLC CWA, hopefully that will help:

http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml

[Muhammad Munir]

Hi Imran

Please make sure that you have defined Security Group Access (SGA)-enabled devices in Cisco ISE and you have added WLC to this SGA to process requests from SGA-enabled devices that can be part of the Cisco SGA solution. Any device that supports the Security Group Access solution is an SGA-enabled device.

SGA devices do not use the IP address. Instead, you must define other settings so that SGA devices can communicate with Cisco ISE.

[Imran Ahmad]

Hi, I found the issue. there was a line added into my WLC WEBAUTH-REDIRECT-ACL which was permiting  ANY ANY,  that was causing my URL-Redirect not to work.

Anyway thanks for your instructions