Network Access Control

Hi,we have a Domain Integrated Safeword application, which was installed on our Domain Controller. Safeword requests were send over the Radius Port to the NPS server, and from there over Port 5040 to the Safeword application. This works without any p...

I'm in the process of finishing up my authorization policy and was hoping to get some input on how to deal with freshly imaged machines.  The current authorization policy relies on Active Directory (peap-tls) and CCM (eap-tls).  Since the newly image...

Hello,under dashboard i activated "Live Authentication". Under register card "General" i can see the IP-Adress of the switch (authenticator) but not the name. The IP-Adress is not listed under IP-Adress but under NAD. Under AAA Protocol > RADIUS Auth...

Hi,We have ASA configured for VPN Access & very large subnets are allowed for VPN then we have created VPN users in ACS & restrict the users access via Downloadable ACL & then on RSA we have created the user and assign them the RSA Tokens. Problems:~...

Hi All,I have the same issue as below. Please advise.We have a strange issue may be an known issue. We have the ACS 5.3.0.40 with Bluecoat Packetshaper (Packeteer) as the Radius Client and tried with PAP as well as CHAP with the suggested VSA. But on...

IOS has the command "login on-success log" to do this, but I cannot find something similiar for NX-OS. Is there a way in Nexus that I can generate a SYSLOG message whenever a user logs into the device?Ultimately I am trying to generate at least one l...

Dear All,We have ACS 5.3, and we observe for every 2 months, its having High Latency, Packet Drops issues while trying to reach from Local LANWe logged TAC support multiple times, but of no permanent fix. We observe after restarting of services it is...

Hi,we are able to import guest accounts, but after clicking on "submit"-button nothing happens. So this is basically what we see:There is no option to print the guestpasses. Is this a bug or are the guestpasses somewhere else? Furthermore there is no...

We are using ISE 1.2. We have a requirement that the Guest when trying to access the Internet he is redirected to the Self Registration Page. Once he fills in the requisite details the request should go to any Approving Authority . Once he/she approv...

Hello;I have a WIFI service in public parks area , with a very large number of visitors , I need to allow the gusts to service themselves without any sponsors. I need them to be able to receive SMS after entering the mobile number. can the ISE do tha...

Afternoon all,I've been experimenting with dot1x on switchports, we have two seperate systems handling AAA at the moment and one of them is tied into the firewall/webfilter (school environment).We would like to use the RADIUS server on that appliance...