This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Hi,
We need your help.
I get this error when I try to configure Authorization policy from Cisco ISE:
5419 DACL Download Failed | |
Failure Reason | 11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected |
The NAD is WS-C3560G-24PS-S and IOS version is : C3560 Software (C3560-IPBASEK9-M)
Do you think that is a compatibily issue ?
Regards,
Solved! Go to Solution.
Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me).
If your issue is resolved, please mark the thread as "answered" :)
The 3560G is fully compatible. Usually this is caused by a typo in the dACL. Double check that and perhaps post the syntax here.
Thank you for rating helpful posts!
Hi Neno,
thank for your reply. As you suggested, after checking I had forgotten some commands :)
Now it works.
Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me).
If your issue is resolved, please mark the thread as "answered" :)