Data migration from ACS 4.2 to 5.2

[suryakant.chavan]

                   Hi Experts,

We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.

Pl's provide me all the steps that i should follow , with the tool i should use for backup.

Regards,

Surya.

[Tarik Admani · Accepted solution]

Hi,

You will need the migration utility in order to guide through the process, is the ACS an appliances or does it currently run on windows?

Here is a link to get you started -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/migrate.html

The steps you will need are as follows:

You will need a migration machine (windows server running the same version and patch of your current ACS).

Using the above link pull the migration file (do not use RDC use VNC it will only work this way)

You will follow the above guide to turn on the migration interface of the ACS through the cli.

Follow the steps through the migration guide and it should go just fine.

Thanks

Tarik Admani

[suryakant.chavan]

HI Tarik,

Thnaks for information

ACS an appliance , so Pl's provide information regading that.

[Amjad Abdullah · Accepted solution]

If you have an appliance you need to have ACS on windows also as a migration machine.

Take backup on the appliance, restore it on the windows ACS (must be same version and patch as the appliance) and then run the migration tool

HTH

Amjad

Sent from Cisco Technical Support iPad App

[Samat Baizdrakhmanov]

link does not work

[Jatin Katyal]

looks like there is some temp. issue and try after sometime.

[Jatin Katyal]

you may try now, its working fine.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/migrate.html

Jatin Katyal


- Do rate helpful posts -