cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1916
Views
0
Helpful
2
Replies
kevink707
Beginner

Disabling Radius/PAP in ACS 5.8

How would I configure Radius on my ACS 5.8 server to not respond to authentication requests coming in over Radius/PAP? I want to force people to use Radius/CHAP instead.

1 ACCEPTED SOLUTION

Accepted Solutions
jalemanp
Cisco Employee

If using the default Access Policy "Default Network Access"  click on its name and on the tab "Allowed Protocols" choose "Allow CHAP"

Capture.PNG

If using a different Access Policy it will be the same just look for "Allowed Protocol"

View solution in original post

2 REPLIES 2
hslai
Cisco Employee

See Configuring Access Service Allowed Protocols to create/update an allowed protocol and then use it in your access policy.

jalemanp
Cisco Employee

If using the default Access Policy "Default Network Access"  click on its name and on the tab "Allowed Protocols" choose "Allow CHAP"

Capture.PNG

If using a different Access Policy it will be the same just look for "Allowed Protocol"

View solution in original post

Create
Recognize Your Peers
Polls
Which of these topics should we host an event in the Community?

Top Choice: ISE- Guest and Posture Troubleshooting (43%)

Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel