dot1x configuration without Certificate

[asheemy]

Hello,

I have ACS version 5.5 and when i configure dot1x for wired and wireless without using Certificates and use only AD user credentials it fail please share a good document for doing this deployment.

[Jatin Katyal]

Hi Asheemy,

What error message do you see inside the Monitoring & Reports > Reports > AAA protocols > Radius authentication.

Here is a doc you can refer for wireless setup:

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113670-eap-authentication-00.html

For wired,

http://www.techrepublic.com/pictures/how-to-configure-acs-52-for-8021x-authentication-on-a-cisco-switch/

Feel free to update the thread for any confusion or error.

Regards,

Jatin

[asheemy]

Hi Jatin,

many thanks for your response i have configured dot1x for Wireless without any issue but for wired no do you have good document for Wired dot1x without using a certificate.

my scenaro just to provide network access to users in AD (permit Access).

[asheemy]

Hi Jatin,

Kindly find the attached file all Dot1x configuration on ACS and Cisco Switch and my laptop machine NIC i don't know why the dot1x is not working.