11-06-2015 05:11 AM - edited 03-10-2019 11:13 PM
Hi All,
please let me know the procuedure to see Cisco ISE system serial number in GUI, i have searched in all the tabs, not getting, note i dont have access to SSH, so only way is to find it in GUI, Please advise, Thanks.
11-06-2015 05:29 AM
If your current license has not expired, you can view the Administration node hardware ID by completing the following steps:
Step 1 From the Cisco ISE Administration interface, choose Administration > System > Licensing.
Step 2 In the License Operations navigation pane, click Current Licenses.
Step 3 Select the button corresponding to the Cisco ISE node that you want to check for the Administration node hardware ID, and click Administration Node to view the PID, VID, and SN.
Please remember to rate useful posts and mark answers as "correct" if applicable.
11-06-2015 08:34 AM
Hi zdesignstudio,
Thanks for your quick reply.
I can find the PID, VID, and SN for Primary admin node under Licensing details, but i have dirstubuted deployment with 5 nodes, is it possible to see serial number for all the nodes, i dont have any option, please advise
11-06-2015 10:00 AM
Unfortunetely console only in that case.
Please rate useful posts and mark answers as correct if applicable.
08-12-2016 03:08 AM
There's help button in left-down corner of screen. When you hover your cursor over it menu appears and you can choose "about ISE" option. Then you will see S/N, version, PID and some other information.
This works even on my secondary node (unfortunately don't have such big distributed environment to check if it works on standalone monitoring or PS node).
08-14-2016 11:05 PM
Use the CLI " show udi" command. Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide