08-13-2016 10:33 AM - edited 03-10-2019 11:59 PM
Hello,
I have ACS version 5.5 and when i configure dot1x for wired and wireless without using Certificates and use only AD user credentials it fail please share a good document for doing this deployment.
08-13-2016 11:00 AM
Hi Asheemy,
What error message do you see inside the Monitoring & Reports > Reports > AAA protocols > Radius authentication.
Here is a doc you can refer for wireless setup:
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113670-eap-authentication-00.html
For wired,
http://www.techrepublic.com/pictures/how-to-configure-acs-52-for-8021x-authentication-on-a-cisco-switch/
Feel free to update the thread for any confusion or error.
Regards,
Jatin
08-14-2016 02:20 AM
Hi Jatin,
many thanks for your response i have configured dot1x for Wireless without any issue but for wired no do you have good document for Wired dot1x without using a certificate.
my scenaro just to provide network access to users in AD (permit Access).
08-15-2016 01:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide