cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
710
Views
0
Helpful
1
Replies

dot1x from catalyst 2960 to rsa

dimensyssrl
Level 1
Level 1

My infrastructure:

- Windows Vista or XP PC

- Catalyst 2960

- RSA Authentication Manager 7.1 with radius server

I'm trying to authenticate my clients through RSA secureid but it doesn't work...

If I try radius authentication with a test client it works properly...

My switch is configured (interesting parts):

aaa authentication dot1x default group radius

dot1x system-auth-control

interface GigabitEthernet0/4

dot1x pae authenticator

dot1x port-control auto

radius-server host 10.242.5.63 auth-port 1645 acct-port 1646 key 7 <removed>

radius-server source-ports 1645-1646

I've read some documents about this, and I've tried all tyoe of authentication, I think that correct auth is Cisco PEAP-GTC

Anyone has a working configuration?

Thanks

Daniele

1 Reply 1

Jagdeep Gambhir
Level 10
Level 10

With RSA you need to set GTC and no other authentication protocol will work.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/user02/o.htm#wp623530

Regards,

~JG

Do rate helpful posts