Network Access Control

I understand how to create a self-signed certificate with ACS 4.2 however....The certificates are only good for one year.  Is there a way to change this to where the certificates are good for 5 or 10 years?Thanks,Josh

Hi AllDose anyone configure cisco ACS for F5 authorisation? Do we need any specific VSA? I am facing issue, authentication is fine but authorisation not functioning.RegardsSameer Shah

Hi,While integrating ACS 5.0 with Microsoft AD i am facing error message (attached)..Can anyone help me on this??AD is reachable from ACS..ACS is behind Firewall but ACS to AD all ports are open & vice-versa.Rgds,Partha

Hi there!I'm trying to configure a Cisco ASA 5520 to authenticate SSL VPN users via either certificate or local AAA, ie, normally the user will connect with a certificate but from time to time, users may forget their card at work and I would like to ...

Hi AllWhen trying to deploy new passwords to switches via Cisco Workswe get the following error message -ERROR:RME_CDL1031:Transport session to device failed TFTP: failedCould not detect protocols running on the deviceWe can talk to said device with ...

1. Suppose we have mutliple Radius server in a Netowrk. If primary Radius server goes down , how secondary server will come into the picture..2. Where can we check ,which Radius server is active (Primary or secondary Radius server)3. Is there any lim...

Dear,I am planning to implement AAA TACAS level authentication option on my Solaris (OS) Servers. (All my servers are Sun Servers)Is Solaris supports AAA TACAS?If its not supportive any patchs or any upgrade can support the TACAS optionAny other alte...

Hi, I have a ACS Server version 4.2 and at the same time i have a Wirless Controller Device on my network.I have given only limited user access to  the Wireless Controller through ACS.The Users are configured in the ACS through which they are logging...

Hello guys,I'm seeing some unknown users in my router when I use the command SHOW USERS.    Line       User       Host(s)              Idle       Location 706 vty 0     celi    idle                 00:00:04 205.209.X.XI think they are trying to acces...

Hello to everyoneWe have a problem with Cisco 2950G 48 EI and ACS (version 4.2) providing dynamic Vlan assignment based on groups On the ACS we configured the following attributes for the specific group64 = VLAN 65 = 802 81 = VLAN NameWe tried for th...

Hello allWe have Cisco ACS 4.1 and we need to know how to configure the user passwords to expire at determinate time and ask the user to change it.its that possible?thanksregards...