06-07-2016 01:29 AM
Hello,
In newer of version of how to - Universal Switch Configuration guide, command dot1x pae authenticator is not there under interface configuration. Is it not required anymore? or is it specific to IOS versions?
I am refereeing to link http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-10-Universal_Switch_Config.pdf
Thanks,
Neelesh Marathe
Solved! Go to Solution.
06-22-2016 07:51 AM
Neelesh, running the 'authentication port-control auto' will add the 'dot1x pae authenticator' automatically. But to minimize confusion, I will add 'dot1x pae authenticator' to the document. Thanks.
Hosuk
06-07-2016 07:59 PM
I tried it on a 3560CG running 15.2.2E and it went unauthorized after that line removed. I will ask howon to comment further.
06-07-2016 10:51 PM
Thanks Hsing
06-22-2016 07:51 AM
Neelesh, running the 'authentication port-control auto' will add the 'dot1x pae authenticator' automatically. But to minimize confusion, I will add 'dot1x pae authenticator' to the document. Thanks.
Hosuk
06-29-2016 03:01 PM
Thanks for clarification. One more thing I observed that in above document the description given for both below commands is same .. [ I hope I am not missing something :-) ]
authentication event server dead action reinitialize
authentication event server dead action authorize
Actually there is little difference between those commands as
I think this distinction should also make in the document .. What do you say
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide