Enable password, when using tacacs+

[Bart Kersten]

Hi,

I have been experimenting with acs 4.2 and a cisco asa 5510. I have managed to authenticate the ASA users with my tacacs server. The user "test" is authenticated with the tacacs server, and can log in. But the enable password is wrong, because i dont know where to place it in the tacacs server.

Now my question is, where do i set my enable password when authenticatig with tacacs+. And for this i mean in the acs 4.2, i know how to do it on the asa.

Thanks in advance!

Sent from Cisco Technical Support iPhone App

[Tarik Admani · Accepted solution]

Hi,

Give this a shot -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrMgt.html#wpxref14440

Thanks,

tarik Admani

[Bart Kersten]

Thanks for your reply!

But if i follow the steps that are discribed in the document. Will the enable password of thats user be the enable password to enter the privilige mode on the asa?

Sent from Cisco Technical Support iPhone App

[Tarik Admani]

Yes.

[Bart Kersten]

Great! Will give it a try tommorow.

Sent from Cisco Technical Support iPhone App