End user in Dot1X enabled.

[clark white]

Dears,

I have a server which Is pulling the file from the SAN which is very fast 2 to 3 sec  but the same file when it is access from the end user machine it is slow for 25 sec. the end user machine is enabled with DOT1X. when I remove the dot1x command from the switch port the end user pc is very fast

Please correct me if I m wrong  ISE is authenticating once when the PC boot's once it is authenticates then it is not in the path of the traffic so how come the ISE is creating the issue,

Please provide the ideas how I can justify/solve the problem.

thanks

[Kanwaljeet Singh]

Hi Clark,

Once the user has been successfully authenticated and placed in the correct vlan, there should be no role of ISE in restricting the download speed. 

We need to see what is going on and i would start by taking a pcap on client to see if there is any delay from client side or server side.

Regards,

Kanwal

Note: Please mark answers if they are helpful.