Endpoint Purge for Static Assigned Endpoints

[chadmi]

All,

Many customers use static MAC filter lists in my patch and would like to have the purge function apply to those endpoints as well.  As it sits right now the InactiveDays only applies to Profiled endpoints and many of my customers are not using profiling at this time.  Is there a way today or can the request be submitted to have the InactiveDays value apply to staticly assigned MAC addresses and be updated based on last logged in date/time?

Thanks,

Chad

[hslai]

I found an on-going TAC case and ISE ESC case on the same issue. If that is one of your cases, please continue working with our TAC and ESC teams.

[chadmi]

Not my case.  Here is the problem, this is only updated when profiling is enabled per the documentation.

What we need is for this to work on non-profile enabled systems as well.

o   When there are updates from endpoint, InactivityDays will be reset to 0 only if profiling is enabled.

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_01100.html#concept_0776B37A2C3542189950F5DFB1961FA2

[thomas · Accepted solution]

I've submitted this thread's feature request to our PMs.