04-25-2018 07:10 PM - edited 02-21-2020 10:54 AM
Hello all,
Is there a good guide that you can recommend for the configuration of both FMC and ISE to be able to perform passive authentication in Firesight using ISE as the identity source instead of using the AD agent?
Thanks
Solved! Go to Solution.
05-07-2018 06:05 AM
Hi,
Please use one of the ISE and FMC integration guides at the below URL. FMC uses pxGrid for idenitty sharing from ISE. Then configure ISE to use PassiveID to integrate with AD.
ISE Design & Integration Guides
Regards,
-Tim
05-07-2018 06:05 AM
Hi,
Please use one of the ISE and FMC integration guides at the below URL. FMC uses pxGrid for idenitty sharing from ISE. Then configure ISE to use PassiveID to integrate with AD.
ISE Design & Integration Guides
Regards,
-Tim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide