03-23-2004 06:19 PM - edited 03-10-2019 07:43 AM
Hi gurus,
Please help:
acs (net
172.16.1.12)---PIX(10.0.20.1/28)-----(10.0.20.32/28)PIX----NAS
Router (Fa0/0 192.168.0.1)--Dial-in User.
NOTE:
--Between PIX there has 2 network coz go through
service provider
--The Fa0/0 has being NAT-ed to 10.0.20.46.
--I can ping from NAS Router to ACS server
--The ACS has being NAT-ed to 10.0.20.20
--The Dial-in user on succeed dialed would be given to
IP network 192.168.0.xxx then NAT-ed to 10.0.20.xxx
(but the dial having a problem which is shown at the
attachment)
-- I have point the NAT-ed ACS server at the NAS
Router as TACAC+ server host
I couldn't found any help on cisco.com the error msg
wasn't at the cisco "error msg tool"
Thank u
HATO
03-29-2004 05:59 AM
What was the exact error message? any update on this ?
03-29-2004 06:20 PM
Hi Sirpa,
thank you for your response. But the problems had been counteract. The error was came from the router when I check the PIX ohhhh the PIX at both side block the traffic.
HATO
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide