cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
513
Views
0
Helpful
1
Replies

How do I setup a Nexus 5672 for user authentication w/LDAP

Nay-Sayer
Level 1
Level 1

I have a Nexus 5672UP running version 7.0(2)N1(1).  I'm trying to figure out how I can setup user authentication to this device using LDAP (Active Directory).  The first thing I noticed when trying to setup LDAP is that when I run the "feature ?" help command, LDAP isn't an option.  Any help would be greatly appreciated.

Thanks. 

1 Reply 1

nspasov
Cisco Employee
Cisco Employee

If the feature is missing/not there after the "?" then most likely that platform does not support it. I did some research and it looks like the N7K guides have that feature in its configuration guides but it is not mentioned in the N5K guides:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/security/configuration/guide/b_Cisco_Nexus_7000_NX-OS_Security_Configuration_Guide.pdf

!

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/security/7x/b_5600_Security_Config_7x.pdf

I tried looking this up in "Feature Navigator" but I could not find it so I cannot confirm this 100%. So it will be nice for someone else to chime in here as well. 

So it looks like your options are either RADIUS or TACACS+

Thank you for rating helpful posts!

Thank you for rating helpful posts!