cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

493
Views
0
Helpful
1
Replies
Highlighted
Beginner

how  i back up cert Cisco ISE 2.4 of SSL cert ?

Hi 

I would like back up cert cisco ise about SSL cert I already apply SSL cert to cisco ISE add cert root ca to ise and bind cert already but after bind cert , cert it gone ref from message cisco ise.

 

so i have plan to upgrade to version 2.6 from 2.4 but i know the cert it will loss after upgrade i don't need register ssl again after upgrade .

 

how  i back up cert of SSL cert ?

 

thank ypu

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advisor

You can do this via the certificate portal. There is an option to "export" any system certificate from the GUI. When you select the certificate checkbox for the one you want to export, then click the export button. You will be prompted to export either just the public key or both the public and private key. You will want to export both the public and private key, using a secure password that you will remember.

The password is key, you need to know the password to import the certificate.

Here is the admin guide steps for exporting system certs.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_0111.html#ID926


If you are doing an inline upgrade from 2.4 to 2.6, the certificates will remain installed.

View solution in original post

1 REPLY 1
Highlighted
VIP Advisor

You can do this via the certificate portal. There is an option to "export" any system certificate from the GUI. When you select the certificate checkbox for the one you want to export, then click the export button. You will be prompted to export either just the public key or both the public and private key. You will want to export both the public and private key, using a secure password that you will remember.

The password is key, you need to know the password to import the certificate.

Here is the admin guide steps for exporting system certs.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_0111.html#ID926


If you are doing an inline upgrade from 2.4 to 2.6, the certificates will remain installed.

View solution in original post