02-19-2022 10:12 PM
I am trying to understand what triggers posture reassessment, in my lab I tested refreshing GPO with gpupdate /force command and the anyconnect system scan restarted, this was reproduced on some computers but not all, I wonder what triggers this and how can I control it .
Solved! Go to Solution.
02-21-2022 08:57 AM
-Also, take a look at this to see general reasons that trigger the discovery process: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/215419-ise-session-management-and-posture.html#anc16
ISE posture module designed to monitor a limited amount of events on the endpoint to trigger a discovery process. List of events which trigger discovery:
New dot1x authentication, PC unlock, IP address change are not detected by the ISE posture module.
02-19-2022 11:37 PM
M.
02-21-2022 08:57 AM
-Also, take a look at this to see general reasons that trigger the discovery process: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/215419-ise-session-management-and-posture.html#anc16
ISE posture module designed to monitor a limited amount of events on the endpoint to trigger a discovery process. List of events which trigger discovery:
New dot1x authentication, PC unlock, IP address change are not detected by the ISE posture module.
03-06-2022 08:49 PM
Consider watching
Security Compliance using ISE Posture
16:52 Posture Deployment Options
18:20 Posture Flow
19:45 Demo: AnyConnect Posture with Windows 10
34:02 Demo: AnyConnect Stealth
37:29 Demo: AnyConnect Temporal
42:04 Agentless Posture Flow
43:44 Demo: Agentless Posture
or watch the Posture Configuration Series
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide