11-24-2021 07:48 PM
Hi All ,
I see the document about concurrent session but I'm confuse about this If I have Base License 2500 License I think can handle 2500 User and 2500 concurrent session or not .
Solved! Go to Solution.
11-30-2021 11:41 AM
A session in ISE is based on RADIUS Accounting Start & Stop status messages from the network access device as defined in RFC2866. A session would be created per unique endpoint actively authorized on the network by ISE. A single user may have more than one active endpoint (laptop, phone, tablet, etc.) or none at all (IP Phone in a lobby).
You may see concurrent / active sessions in ISE under Operations > RADIUS > Live Sessions .
And since you appear to be concerned with Licensing you may see your License consumption based on active sessions in the Licensing screen Administration > System > Licensing.
11-24-2021 11:58 PM
if you 2500 it will handle as expected ( even unofficially it does more,) you only see compliance issue.
11-25-2021 12:31 AM
Hi Balaji
You mean We can handle session more than purchase license or not (unofficially) But the true way must purchase base license depend on the real users . Can you explain count concurrent session ? In this I use SSL VPN for authentication . I think if in this case message radius authentication success it's count session to 1 session or not . and can we detect threshold of reach maximum license ?
Thank you for advise.
11-25-2021 03:34 PM
as per my comment related to device administration.
as per the VPN, you need to have based on the user count.
Can you explain count concurrent session ?
11-28-2021 07:43 PM
Hi Balaji
Thank you for information . I have a small question If the customer reach maximum license what happen after the license max limit ?
11-29-2021 02:13 AM
VPN any client may have have issue, but device admin works as expected.
12-08-2021 03:14 PM
12-08-2021 06:49 PM
Thank you for information .
11-30-2021 11:41 AM
A session in ISE is based on RADIUS Accounting Start & Stop status messages from the network access device as defined in RFC2866. A session would be created per unique endpoint actively authorized on the network by ISE. A single user may have more than one active endpoint (laptop, phone, tablet, etc.) or none at all (IP Phone in a lobby).
You may see concurrent / active sessions in ISE under Operations > RADIUS > Live Sessions .
And since you appear to be concerned with Licensing you may see your License consumption based on active sessions in the Licensing screen Administration > System > Licensing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide