11-18-2010 11:50 PM - edited 03-10-2019 05:35 PM
Hi,
As we know, ACS5.2 is required with a base license-- supporting 500 network devices.
Sometimes there are lots of AAA clients or network devices that are authenticating simultanious. So my question is, how to count the network devices allowed to auth on ACS5.2? Does that only include network devices, or including both any network devices or AAA clients?
Rgds,
Laowu5017
Solved! Go to Solution.
11-19-2010 12:08 AM
Hi,
ACS 5.x counts the number of AAA clients that are configured on the ACS.
Please note that AAA clients and networks devices is the same and they comply switches, routers, WLCs, or whatever other device configured under
Network Resources > | ... > | Network Devices and AAA Clients |
AAA Clients are NOT the AAA suplicants.
The end user clients PCs are the AAA suplicants, and for this there is no limit number.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
11-19-2010 12:08 AM
Hi,
ACS 5.x counts the number of AAA clients that are configured on the ACS.
Please note that AAA clients and networks devices is the same and they comply switches, routers, WLCs, or whatever other device configured under
Network Resources > | ... > | Network Devices and AAA Clients |
AAA Clients are NOT the AAA suplicants.
The end user clients PCs are the AAA suplicants, and for this there is no limit number.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
11-19-2010 01:02 AM
Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide