Network Access Control

Hi,To be precise I am using the ACS version 5.1.0.44.4.My AAA client are IOS 15.0.1 (M2) for the router and 12.2.52 (SE) for the switchThe main issue is to- Send a message to the end-user that his password is about to expire- Give the tool to the use...

Hello,I have a project to deploy dot1x wireless using using certificate authentication only - ie, once a certificate is presented to the ACS that is issued by a trusted CA, the connection is permitted.So no further checking of user/machine credential...

Hi All,I have ASA and I am using ACS server is a VM Ware applicance.My question now is I would like to authenticate two different types of devices from a single Radius client.Device 1 – Authenticating using Username and Password from Domain1 and Devi...

Hi,I'm guessing this one will be quite straightforward, but so far I just can't make this work.I have two Tacacs+ accounts- admin (lvl 15) and troubleshoot (lvl 2), with authentication and authorization being performed on the ACS.On the ACS I have co...

Hi,using ACS 4.2 and I can't find a way to bind an incoming NAS port to a specifc IP Pool: When a user connects the request to auth comes from 2 possible NAS ports randomly (this cannot change).Depending on which NAS makes the requests determines the...

Hi, is there any possiblity to integrate ACS SE appliance to integrate with two different active directory forests. There is no truns between both the forests.if yes then what are the requirements and what r the steps involved in it.Thanks

I have created a guest wirelessnetwork using webauth on a 4402 running 6.0.182.I'm using ACS with a group mapping to Windows Active directory for authentication.It works perfectly. When i create users in the guest group in Windows, they get mapped pr...

Hello,I re-image my ACS1120 5.0 but  it fails. I want to downgrade my ACS5.0 to ACS4.2. Downloaded my ISO image file and made bootable dvd. The bootable dvd will atumatically format and reimage the appliance but unfortunately, it does not continueand...

We currently have 2 x ACS4.x servers performing all AAA in our organisation.  I have just received 2 x ACS 5.1 appliances which I would like to implement and for these to take over the running from the 4.1 boxes.  As I am not 100% of the historical c...

The ACS server can be configured to work with two windows domains? to authenticate users that belong to the domain called "a" and "b", the protocol to authentificate it is 802.1X in a Wireless Enviroments (WLC4400+ACS4.2+Two Windows Domain).

Hi,I am unable to get my Cisco IP Phone to authenticate using MAB on ACS5.2. The phone is not being allocated to the Voice vlan, and hence not getting IP address from DHCP. My switch port config below:interface FastEthernet1/0/10 switchport access vl...