How to enter the disk of ACS and create a new folder ?

[chen.xingye11]

Hi all

     Do you know how to enter the disk of ACS , create a new folder and write in some files?

I have to  "Add the following configuration to the file /usr/local/etc/tacacs.conf for the TACACS+ server to authenticate RBM" for the AAA authenticate

of Brocade, but it shows i must add that file to TACACS+  for authentication.

     How can i do that?   Type   mkdir disk:/usr/local        ?

My ACS version is 5.8

Thanks for your advise.

[M. Wisely]

Have a look at this document to see if it helps:

http://blog.remembertheview.com/2015/09/01/setting-brocade-switches-tacacs-authentication-cisco-acs/

You don't need to create folders and edit configuration files directly even if you could.

[Javier Henderson]

The instructions you reference seem to be meant for the open source tac_plus TACACS+ server.

For ACS, you'd configure a shell profile to pass back to the Brocade switch any custom A/V pairs that are needed.

This document has some examples for various third party devices:

http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115926-tacacs-radius-devices-00.html

Javier Henderson

Cisco Systems