cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

3027
Views
0
Helpful
4
Replies
Highlighted
Beginner

How to Export Certificates from ISE using CLI

I have a two node ISE deployment at version 1.4. I will be performing an upgrade to the version soon and my research has found that I need to perform a backup of my certificates and keys using the CLI.

I have searched the forums and general internet with no luck. Can someone tell me how to export my certificates and keys using the CLI in ISE?

Thank you,

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Frequent Contributor
Frequent Contributor

Re: How to Export Certificates from ISE using CLI

4 REPLIES 4
Highlighted
Frequent Contributor
Frequent Contributor

Re: How to Export Certificates from ISE using CLI

You can export it from GUI. See next

 

 

Highlighted
Frequent Contributor
Frequent Contributor

Re: How to Export Certificates from ISE using CLI

Highlighted
Beginner

Re: How to Export Certificates from ISE using CLI

I was not aware that I could export all of my certificates/keys from the UI.

I just completed exporting all of them so it works well.

 

Thank you!

Highlighted
VIP Advisor

Re: How to Export Certificates from ISE using CLI

Hi,
You appear to only be able to export the Internal ISE CA store certificates via the CLI, you possibly aren't using them, unless you are using ISE CA to distribute certificates to clients/devices.

As Abraham advised you'll have to backup the Admin, EAP, Portal etc certificates via the WebGUI.

HTH