cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13622
Views
25
Helpful
5
Replies

How to generate/export a private key in ISE 2.0: Any idea?

Supercell292929
Beginner
Beginner

Hello,

 

     Curious to know the process mentioned in the title of this discussion. I'm looking everywhere for this, but cannot find it so far. Any detailed explanation on how this can be achieved would be greatly appreciated.

 

Thank you in advance.

1 Accepted Solution

Accepted Solutions

Extract Private Key from .pfx

-----------------------------------

openssl pkcs12 -in Client-cert.pfx -nocerts -out key.pem -nodes

 

Extract Cert from .pfx

-----------------------------------

openssl pkcs12 -in certname.pfx -nokeys -out cert.pem

View solution in original post

5 Replies 5

Flavio Miranda
Advisor
Advisor

Hi

"

Cisco does not recommend exporting the private key associated with the certificate because its value may be exposed. If you must export the private key, you must specify an encryption password for the private key. You will need to specify this password while importing this certificate into another Cisco ISE server to decrypt the private key."

 

Anyway, you can do this on the Administration / System / Certificate.

 

-If I helped you somehow, please, rate it as useful.-