09-03-2013 07:07 AM - edited 03-10-2019 08:51 PM
Hello,
I have a cluster of ISE servers in version 1.1.4. I patched it with Patch 4.
Then, I added more ISE servers in version 1.1.4. How to I patch these new servers to Patch 4 ? In the status page, it displays correctly that some servers have the patch installed while the new ones do not have it installed. But I don't find the way do install the patch on the remaining server ?
Can anyone tell me how to proceed ?
Thanks,
David
Solved! Go to Solution.
09-03-2013 08:53 AM
Please patch them from the CLI, place the patch file on your repository and run the "patch...." command and when they come back up and connect to the ISE nodes you will see the correct status in the patch install status screen.
I have done this many times and have had success, and honestly think this is the only method.
Tarik Admani
*Please rate helpful posts*
09-03-2013 08:53 AM
Please patch them from the CLI, place the patch file on your repository and run the "patch...." command and when they come back up and connect to the ISE nodes you will see the correct status in the patch install status screen.
I have done this many times and have had success, and honestly think this is the only method.
Tarik Admani
*Please rate helpful posts*
09-03-2013 09:16 AM
following link describe steps to apply patch
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_admin.html#wp1054914
09-03-2013 11:07 AM
kindly check the following link for step by step update method
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_admin.html#wp1259408
09-04-2013 02:42 AM
Hi,
I had to follow Tark Admani's advice to patch ISE servers individually. It worked like a charm by installing the patch from the CLI on the servers.
The Cisco docs on how to manage patch installation does not mention that method.
Many thanks,
David
09-04-2013 09:03 AM
Please check the below link for ISE-Patches
http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_admin.html#wp1054080
09-05-2013 12:22 PM
If you need to install the patch on one or more secondary nodes, ensure that the nodes are up and repeat the process from Step 1 to install the patch on the remaining nodes.
Please go through the link for the installation steps and form the page 119.
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ug.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide