Configuring Cisco Access Server radius to work with Wireless Access Point

[oyaje]

How can I configure my Cisco AS5350 aaa for RADIUS to work with a wireless access point?

[irisrios]

On the Radius server, you need to configure, the "radius-server host" , define the AAA server group, configure RADIUS login authentication and some more paramenters.

Check out the following documents for a detailed configuration example:

Configuring RADIUS and TACACS+ Servers

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a9c.html

You have to configure the "radius-server vsa send [accounting | authentication]" on the wireless access point to recognise the VSAs.

[Naveen Kumar]

Please check the configuration examples  for Cisco AS5350 for radius:

http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54shcfg_ps501_TSD_Products_Configuration_Guide_Chapter.html