I am getting tacacs error in nexus switch

[poojaryp1974]

Hi ,

We apply same config to another switch  and it is working.Its gives me below error. Kindly let me know what the error is it is.

SW-9200-KP-OOB-UCS(config)# aaa accounting default group PCCU-ISE

Error: AAA authorization failed AAA_AUTHOR_STATUS_METHOD=17(0x11)

S

[MHM Cisco World]

sorry what is relate of aaa accouting with AAA authorization ?
can I see all aaa config in both SW

MHM

[poojaryp1974]

Hi ,

It relate to accounting.

The configuration as below,

feature tacacs+

!

tacacs-server host x.x.x.x key  z.z.z.z

tacacs-server host y.y.y.y key  z.z.z.z

tacacs-server timeout 15

tacacs-server deadtime 5

!

aaa group server tacacs+ PCCU-ISE

  server x.x.x.x

  server y.y.y.y

  deadtime 10

  use-vrf management

  source-interface mgmt 0

!

aaa authentication login default group PCCU-ISE local

aaa authentication login console group PCCU-ISE local

aaa authentication login error-enable

aaa authorization config-commands default group PCCU-ISE

aaa authorization commands default group PCCU-ISE

aaa accounting default group PCCU-ISE

[Greg Gibbs]

If you are using Cisco ISE, see the following guide with example configuration for Nexus platforms.

Cisco ISE Device Administration Prescriptive Deployment Guide 

If that does not solve your issue, you will need to provide much more detail for any meaningful assistance. See How to Ask the Community for Help.

If this is a Production issue, contact TAC for the quickest resolution.