I need to configure Cisco switch 9200 / 9300 for ISE 3.x Trustsec

[MonkeyBear007]

I need to configure Cisco switch 9200 / 9300 for ISE 3.x Trustsec
anyone know a good doc or training video I can use to setup

[marce1000]

  - FYI : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-9/configuration_guide/cts/b_179_cts_9300_cg/cisco_trustsec_overview.html

  M..

[Rob Ingram]

@MonkeyBear007 

This link has a collection of all the relevant TrustSec design/deployment guides - https://community.cisco.com/t5/security-knowledge-base/ise-berg/ta-p/5041171#trustsec

Cisco Live has a load of videos in regard to TrustSec/ISE - https://www.ciscolive.com/on-demand/emea-learning-maps/security/ise.html

This 3rd party site also has numerous TrustSec/ISE videos - https://www.labminutes.com/video/sec

Even old documents for 3x50 switches are still mostly relevant to 9x00 series switches, the basic functionality remains the same. IOS-XE firmware 17.15.1+ on the 9x00 does support PAC less communication, which is a major function of TrustSec - this requires ISe 3.4.

[ahollifield]

ise-support.com