07-24-2019 05:18 AM
Greetings,
Need to confirm if IBNS 2.0 is supported and operational on Catalyst 3560V2-24/48PS Switches specifically.
If so, what should be the IOS for them?
I am able to find it for generic 3560 and 3560-X in following document:
As far as I understand, it should be supported post 15.x IOS code regardless of switch model.
Regards,
Aekaansh
Solved! Go to Solution.
07-24-2019 05:23 AM
07-27-2019 03:24 PM
Need to confirm if IBNS 2.0 is supported and operational on Catalyst 3560V2-24/48PS Switches specifically.If so, what should be the IOS for them?
I am able to find it for generic 3560 and 3560-X in following document:
...
No, it's not supported. 3560V2 can run up to the IOS 15.0(2)SE train, I believe, while IBNS 2.0 requires 15.2(2)E train at the minimal. The site calls out specifically
Both are later than 3560V2.
07-24-2019 05:23 AM
07-30-2019 01:56 AM
Thank you for your response!
07-27-2019 03:24 PM
Need to confirm if IBNS 2.0 is supported and operational on Catalyst 3560V2-24/48PS Switches specifically.If so, what should be the IOS for them?
I am able to find it for generic 3560 and 3560-X in following document:
...
No, it's not supported. 3560V2 can run up to the IOS 15.0(2)SE train, I believe, while IBNS 2.0 requires 15.2(2)E train at the minimal. The site calls out specifically
Both are later than 3560V2.
07-30-2019 01:58 AM
Thank you for your response!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide