01-26-2018 06:56 AM
Good day,
I am totally new whith ISE solution, i have this concern, in the training section i see that the configuration in the ISE, just one interface is configured just the management interface, so, i see the appliance has 6 inrfaces, my question is, the other 5 interfaces what are these for
may is a stupid question, but as i say i am totally new, and i am the guy who has to installa the applaiance on cutomers
Solved! Go to Solution.
01-26-2018 07:02 AM
You could use the other interfaces to separate RADIUS/TACACS from management or add an interface out into a DMZ for guest portals.
I typically delete all 6 E1000 interfaces and add back in one VMXNET3 interface.
01-26-2018 07:02 AM
You could use the other interfaces to separate RADIUS/TACACS from management or add an interface out into a DMZ for guest portals.
I typically delete all 6 E1000 interfaces and add back in one VMXNET3 interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide