09-11-2010 12:53 PM - edited 03-10-2019 05:23 PM
Dear Community!
I would like to configure Cisco ACE 4710 CLI and WebAmin to use ACS v4.2 TACACS+ authentication and accounting feature. After found a Cisco document, which describes ACE AAA features (http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/security/guide/aaa.html), I have setup all configuration parameters mentioned in this document, everything seems to be OK.
But...
I have a TACACS+ group named "Network Administrators", which has privilege level 15 option enabled, so admins do not have to type enable password when authenticating. After setting up ACE AAA, the prvilege level 15 option stops working, while logging in Cisco routers: after authentication, the user remains in privilege level 1.
Logging in Cisco switches seems to be OK, stepping immediately to level 15 as usual.
I tried upgrading IOS in a router, but no luck...
Does anybody have any experiance about this "bug"?
Thanks in advance!
Regards,
Belabacsi
@ Budapest, Hungary
09-21-2010 02:33 AM
Hello Bela
In ACE on every context (including Admin and other) you should have following strings:
tacacs-server host x.x.x.x key 7 "xxx"
tacacs-server host x.x.x.x key 7 "xxx"
aaa group server tacacs+ MYTACACS
server x.x.x.x
server x.x.x.x
aaa authentication login default group MYTACACS local
aaa authentication login console group MYTACACS local
aaa accounting default group x.x.x.x
On ACS side for group named "Network Administrators" you should configure in TACACS settting:
1. Shell (exec) enable
2. Privilege level 15
3. Custom attributes:
shell:Admin*Admin default-domain
if you have additional context add next line
shell:mycontext*Admin default-domain
After loging to ACE and issuing sh users command you should see following
User Context Line Login Time (Location) Role Domain(s)
*adm-x Admin pts/0 Sep 21 12:24 (x.x.x.x) Admin default-domain
Regards,
Stas
11-25-2011 06:19 AM
Hi Stas,
Do you have any advice on setting up ACS 5.2
I tried creating a shell profile that has a custom attribute similar to above but couldn't get it working.
Thanks,
-Andrew
11-25-2011 07:47 AM
Hello Andrew,
This settings are working in ACS 5.2. What do you have in ACS log? Are user authorized with less privileges or doesn't athorized at all?
Best Regards,
Stas
12-02-2011 08:30 AM
Hi Stas,
The user gets authenticated but only get Network-Monitor priviledge.... below is a screenshot of my Shell Profile with the attribute - this is where I think I am going wrong..... what do you think
12-02-2011 12:50 PM
Hello Andrew,
Could you please provide TACACS log from ACS and verify in log that correct SHELL PROFILE are choosen. Also - how many context do you have? In Monday I try to veify settings in ACS (today I don't have direct access to ACS & ACE - this devices are left on my previuos job)
Best Regards,
Stas
12-05-2011 12:25 AM
In Attribute row you should write shell:Admin and in Value - Admin default-domain
Regards,
Stas
12-15-2011 07:46 AM
Hi Stas,
That worked a treat!!
Thanks for your effort
12-15-2011 01:36 PM
Hello Andrew
Nice to hear this.
Best Regards,
Stas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide