I have topology which includes IOS XR image running on VM Maestro
Need to configure PIM. Below configuration syntax is not available in the image.
Cisco IOS XR version: 6.0.1
VIRL : Version: 1.3.0
Is there any compatibility issue for both the version?
multicast-routing
address-family ipv4
interface all enable
!
!
router pim
address-family ipv4
rp-address 145.5.5.5
interface GigabitEthernet0/0/0/0.10
!
interface GigabitEthernet0/0/0/1.10
enable