cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
447
Views
0
Helpful
2
Replies

Cisco ASA 5585-X, from one interface traffic is not passing to another interface

mithun.ccie
Level 1
Level 1

From one interface traffic is not forwarding to another interface.

 

ciscoasa# show module all

Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10 JAD162206BS

Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
0 a493.4c43.1860 to a493.4c43.186b 2.0 2.0(13)0 8.4(4)1

Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------

Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
0 Up Sys Not Applicable

Firewall is in transparent mode

Following is the interface level configs

interface GigabitEthernet0/0
description WAN
nameif inside
bridge-group 1
security-level 100
!
interface GigabitEthernet0/1
description LAN
nameif outside
bridge-group 1
security-level 100

 

 

 

2 Replies 2

johnd2310
Level 8
Level 8

HI,

Your interfaces are the same security level. Is this correct? Shouldn't the outside interface be security level 0?

 

Thanks

John

 

**Please rate posts you find helpful**

tried zero as well, but found same . As both are same security level interface , we have allowed same-secuirty-level