cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

976
Views
0
Helpful
2
Replies
Highlighted
Beginner

ip address pool in ACS 5.3?

Is it possible to create an ip address pool for ip address assignment in ACS 5.3, like it used to be possible in 3.x and 4.x?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advocate

Hi,

No, this feature is no longer supported:

Features Not Supported

The following features are not supported in ACS 5.3:

The Create, Read, Update, and Delete (CRUD) operations for network device objects in REST PI.

The Create, Read, Update, and Delete (CRUD) operations for end devices (hosts) in REST PI.

Ability to provide IP addresses from IP address pools defined in ACS.

Additional comparison operators for policy definitions such as full range or string and integers matching operators.

Instance specific configuration

Ability to show the IP address from where the request came, in the Failed Authentications report

Ability to authenticate the users against an external ODBC database.

RDBMS support for synchronization of user accounts with an external database.

Online certificate status protocol (OSCP).

Support for on VMware installations with less than 500 GB hard disk.

Support for VMware Tools.

Support for Multiple Network Interface Card (NIC).

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp216411

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani
*Please rate helpful posts*

View solution in original post

2 REPLIES 2
Highlighted
Advocate

Hi,

No, this feature is no longer supported:

Features Not Supported

The following features are not supported in ACS 5.3:

The Create, Read, Update, and Delete (CRUD) operations for network device objects in REST PI.

The Create, Read, Update, and Delete (CRUD) operations for end devices (hosts) in REST PI.

Ability to provide IP addresses from IP address pools defined in ACS.

Additional comparison operators for policy definitions such as full range or string and integers matching operators.

Instance specific configuration

Ability to show the IP address from where the request came, in the Failed Authentications report

Ability to authenticate the users against an external ODBC database.

RDBMS support for synchronization of user accounts with an external database.

Online certificate status protocol (OSCP).

Support for on VMware installations with less than 500 GB hard disk.

Support for VMware Tools.

Support for Multiple Network Interface Card (NIC).

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp216411

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani
*Please rate helpful posts*

View solution in original post

Highlighted

Thanks for your reply.