09-26-2012 12:58 AM - edited 03-10-2019 07:35 PM
Hi,
I had a working server running ISE version 1.1.0.665 but someone in the build room decided to pull the power out of the server rather than shutting it down correctly. I have booted the server back up however the web management page was not accessable. I have checked the server status and the end result is the Application Server in the "still initializing" stage. I have left the server for several hours and the status has not changed.
I know people have previously run into this issue but no one has posted any resolution or confirmed that a rebuild is the only solution. Can someone please inform me if a solution to this issue exists. I have tried to create an on-demand backup but it seems to fail when attempting to provide the credentials (which are correct) for the FTP server.
09-26-2012 05:42 AM
Hi,
Make sure dns and ntp is all working. I would try to stop and start the services.
All stop ise
App start ise
Sent from Cisco Technical Support Android App
07-21-2014 03:15 AM
Hi Guys,
I am also facing the similar issue, can I ask what was done to have this resolved.
I have rebooted the server, stop and start the app. But the application server is still in initializing.
Please help
Thanks and Regards,
Kanes.R
07-22-2014 08:32 AM
Please verify this 2 bugs:
Known Affected Releases: | (1) |
Symptom:
ISE CLI shows Application Server is still initializing
Conditions:
Downloading / viewing large logfiles from pdp causes out of memory error
example you are downloading ise-prrt.log
Workaround:
none
Known Affected Releases: 1.2(0.899) | (1) |
Known Fixed Releases: | (2) 1.2(0.906) 1.2(1.198) |
07-23-2014 03:27 AM
Hi Guys,
Thank you for the assistance. I have already re-imaged the ISE and issue is now resolved.
Regards,
Kanes.R
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide