ISE 1.1 - AD Page Error

[Mubasher Sultan - 2x CCIE # 20149 (R&S | Sec)]

Hi,

While configuring the ISE 1.1... I have to integrate the AD with ISE...

But, i m not able to open the page and its giving me the below error...

There was an error while parsing and rendering the content. (Could not load class 'dijit.layout.TabContainer'. Did you spell the name correctly and use a full path, like 'dijit.form.Button'?)

Error code WAP00008.

Snap-shot is attached...

Please advise.

Regards,

Mubasher Sultan

[Tarik Admani]

Mubasher,

Can you share the details of your setup, this looks like a POC do you have the specs of the virtual machine?

thanks,

Tarik Admani

Please remember to rate helpful posts!

[JHILL2]

Hello,

I am getting the same error.  I'm doing a PoC as well.  Did anyone find a fix for this?

[jrabinow]

One suggestion is to clear the browser cache and try again

Have you previously saved any configuration in the AD page?

[JHILL2]

Thanks jrabinow.  It may just be a problem with IE 7.  I was able to drill down with Firefox 12.0.

[jrabinow]

IE7 is not supported. IE8 or IE9 in compatibility mode and Firefox

Good luck with your POC

[JHILL2]

Here are my VM settings

Memory - 4GB

CPUs - 2

Hard Disk - 90 GB

[Venkatesh Attuluri]

minimum recommended VM setting are as following

Platform	Cisco Identity Services Engine Appliance 3315 (Small)	Cisco Identity Services Engine Appliance 3355 (Medium)	Cisco Identity Services Engine Appliance 3395 (Large)
Processor	1 x QuadCore Intel Core 2 CPU Q9400 @ 2.66 GHz (4 total cores)	1 x QuadCore Intel Xeon CPU E5504 @ 2.00 GHz (4 total cores)	2 x QuadCore Intel Xeon CPU E5504 @ 2.00 GHz (8 total cores)
Memory	4 GB	4 GB	4 GB
Hard disk	2 x 250-GB SATA HDD (250 GB total disk space)	2 x 300-GB SAS drives (600 GB total disk space)	4 x 300-GB SFF SAS drives (600 GB total disk space)
RAID	No	Yes (RAID 0)	Yes (RAID 0+1)
Ethernet NICs	4x Integrated Gigabit NICs	4 x Integrated Gigabit NICs	4 x Integrated Gigabit NICs

[sherif_magdy_ibrahim]

this a browser problem remove preventing addons or change the browser ,,

[Ravi Singh]

I would recommend you to use Firefox 23.0.1..

[eugenio desideri]

damn , same problem here , since updated to firefox 25.0 , with 24 version works like a charm....

anyway , in mycase is the CiscoISE  appliance not a VM to be involved,

and works great with IE 10 , 9 , and FIREFOX 24 , must be some kind of browser related issue ,

Eugenio Desideri

CCNA .-CCNA SEc

security consultant

[Charlie Moreton]

Firefox v25 causes an issue in ISE.  This is a known issue to the ISE Business Unit.

You can download Firefox v24 here:

https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/

Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.

Charles Moreton

[eugenio desideri]

kk THX that's answer my doubt.....

[Mark Lancaster]

I am also seeing the "There was an error while parsing and rendering the content." error messages in Chrome 31.0.1650.63.

[jrabinow]

Chrome is not supported for either ACS or ISE. FF 25 will be supported on ISE with patch 5 coming later this month