02-04-2014 07:27 AM - edited 03-10-2019 09:21 PM
Hello,
I have a problem with the following setup:
- Cisco ISE 1.2 (latest patch)
- Cisco WiSM with 7.0.220.0 (first generation)
I have build Guest access via ISE. Because the WiSM's highest version is 7.0.X I used LWA with a redirect to the ISE guest portal. When using the Guest SSID with a iPad the client is redirected to the ISE guest portal and the user can enter his credentials (deliverd by the Sponsor). After clicking "Sign On" the client is forwarded to the "Device Registration Portal" of ISE and need to register his MAC address.
We have try a lot of differend settings but we cannot switch off the forward to the "Device Registration Portal". We only want to use the Guest User portal.
Please can someone help me to find a solution for this problem?
Thank you in advance.
02-04-2014 08:45 AM
I know this might be reaching, but have you turned off the My Devices portal?
If so, an idea of the different settings you have already tried might help.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
02-05-2014 04:10 AM
Thank you for the tip, I've tested this but it doens't solve the problem.
02-10-2014 02:11 AM
I think you should disable in the DefaultGuestPortal (Administration >> Web Portal Management >> Settings >> Guest >> Multi-Portal Configurations >> DefaultGuestPortal >> Operations .... Uncheck the option Enable Self-Provisioning Flow
02-10-2014 05:29 PM
Yes nkumarsr - that's correct.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide