ISE 1.4 Guest WLAN MAC Filtering

[Mokhalil82]

Hi

I have just installed ISE 1.4 and the corporate devices are working. However I am having issues with the Guest setup.

On the WLC (5508), I have a foreign and guest controller setup, the guest being in the DMZ. I am configuring ISE as the radius server and when I select the MAC Filtering option, it does not let me connect to the Guest WLAN. Keeps trying to connect and fails authentication. 

I have setup radius, defined the WLC in ISE as well, checked the overide AAA and selected radius as the NAC agent as per the online instructions. But I believe the MAC authentications keeps failing.

Any ideas anyone

Thanks

[nspasov]

Do you see failed authentications in ISE?

[Mokhalil82]

Hi Neno

Managed to get it working. Issue was with the authorisation rules needed tweaking and the accounting server not setup properly.

Thanks

[nspasov · Accepted solution]

Good job on solving your own problem! (+5) from me!

If your issue is resolved, please mark the thread as "answered" :)