cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1459
Views
0
Helpful
3
Replies

ISE 1.4 to 2.1 Fail

alex.fana1
Level 1
Level 1

Good day all,

While upgrading from 1.4 to 2.1 I encountered an issue with my certs which is causing the upgrade to fail.

Error:

% Warning: Could not connect to new deployment Primary  as its certificate is not trusted or valid. Import the valid https certificate of the same to current Primary node's certificate store.

 

I have checked all my certs and they are all valid. There are however, some trusted certs which are disabled since they are no longer in use. Any advice?

 

Cheers,

1 Accepted Solution

Accepted Solutions

karans
Level 1
Level 1

Hi Alex,

You will need to log into each of your server nodes and export the HTTPS certificate from
the Local Certificate (server certificate) section.

Then, go to each node and navigate to the Certificate Store.

In here, you will need to import any missing certificates.

View solution in original post

3 Replies 3

karans
Level 1
Level 1

Hi Alex,

You will need to log into each of your server nodes and export the HTTPS certificate from
the Local Certificate (server certificate) section.

Then, go to each node and navigate to the Certificate Store.

In here, you will need to import any missing certificates.

Thanks Karan,

 This worked, the certs had to be reimported.

Hi Alex,

Do rate helpful posts and mark answers as correct that worked for you so that it can be referenced by others as well.

Thanks..

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: