cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1323
Views
5
Helpful
5
Replies
Highlighted

ISE 2.1 BYOD problem

Hi everyone,

I have a problem with Wireless Single SSID - 802.1X with BYOD Portal

When Employee opens a browser and is redirected, an error appears on the portal page that says "Unable to obtain the user information needed for network access. Try again."

The client is an Android devices that use PEAP MSCHAPV2 as onboarding authentication protocol.

In the Report - Supplicant Provisioning, in the field "failure" i have this error: Error while trying to determine access privileges: No matching SPW profile found.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi Simon,

The redirect ACL on the WLC has to be configured to support access to the Google Play store so Cisco Network Setup Assistant APP can be downloaded to continue the registration process.

If Employees have downloaded App (at home) before starting the registration process they can just open the app at this point and ignore the redirect.

View solution in original post

5 REPLIES 5
Highlighted
Beginner

It use to be with Android you had to download a supplicant for Android Phones. Not sure if this is still the case though.

Highlighted

The supplicant it's downloaded after Device Registration but my error is before.

Highlighted

Hi Simon,

The redirect ACL on the WLC has to be configured to support access to the Google Play store so Cisco Network Setup Assistant APP can be downloaded to continue the registration process.

If Employees have downloaded App (at home) before starting the registration process they can just open the app at this point and ignore the redirect.

View solution in original post

Highlighted

The problem is solved setting correct parameter in WLC, but now I have another problem.

After device registration, when I click on play store, ISE redirects on playstore home and when I search "Cisco Network Assistant Setup", this error occurred "Connection Time out".

It is normal that ISE doesn't redirect directly to Cisco Network Assistant Setup page ?

Highlighted

What was the setting on the WLC that resovled the original issue?

Content for Community-Ad