08-06-2018 11:36 PM - edited 03-11-2019 01:47 AM
Hi Team,
I have a customer who is currently running ISE version 2.1 patch 7.
They would like to know the earliest ISE support date (via ISE patch) for MAC OS 10.14 Mojave.
Note: 10.14 Mojave tentative release is by October 2018.
Any comments or roadmap is highly appreciated.
-
Regards
Mayil Raj.
Solved! Go to Solution.
08-07-2018 08:04 AM
11-07-2018 11:02 PM
That did it! Apparently the automatic update had stopped working and I couldn't even run a manual one due to ISE complaining about the feed not being reachable. I has to download the Posture Update manually and then upload it to ISE. After installing the Posture Update I went from Supported OS version 43.0.0.0 to 46.0.0.0.
Thanks for the help!
04-09-2019 11:10 PM
08-07-2018 07:12 AM
08-07-2018 08:04 AM
08-09-2018 11:34 AM
10-03-2018 06:14 AM
Jason,
Is there any update on the posture feed update? I know you said it was coming a couple months ago. As of today, it looks like online resources for ISE 2.3 and 2.4 still stop at MacOS 10.13, High Sierra, and nothing for 10.14 Mojave is yet listed.
Thanks for all you do,
-Pete
10-03-2018 11:51 AM
10-04-2018 04:49 AM
Jason,
Again, thanks for all you do and your responsiveness. Are the resource descriptions wrong, and the MacOsSPWizard 2.2.1.43 covers MacOS 10.14 (Mojave) also. I just captured this from an ISE 2.4 box (2.3 looks the same)?
Respectfully,
-Pete
10-04-2018 04:54 AM
10-11-2018 01:24 PM
10-30-2018 11:40 PM
I am having similar issues with ISE 2.2 on patch 4. Our Mac admins are saying they cannot register Macbooks running Mojave 10.14 using the ISE BYOD self registration.
I ran a manual feed update today but I cannot see Mojave or MacOS 10.14 appearing anywhere in ISE.
The feed update gave our ISE the SPW called MacOsXSPWizard version 2.3.0.43. Should this one support Mojave/10.14?
Also in our Client Provisioning Policy I cannot see Mojave/10.14 under the Operating Systems (see attached image), should it work anyway?
10-31-2018 05:13 AM
Cisco verified that the latest 10.13 service also supports 10.14. The description simply needs to be updated
10-31-2018 05:56 AM
10-31-2018 12:42 PM
Your screenshot looks a symptom when the Cisco supported OS version not updated via ISE Posture Updates. Please perform "Update Now" and that version number is 46.0.0 or later. If that not helping, please engage Cisco TAC.
11-07-2018 11:02 PM
That did it! Apparently the automatic update had stopped working and I couldn't even run a manual one due to ISE complaining about the feed not being reachable. I has to download the Posture Update manually and then upload it to ISE. After installing the Posture Update I went from Supported OS version 43.0.0.0 to 46.0.0.0.
Thanks for the help!
08-17-2018 06:30 AM
Is there a workaround to this? I'm confused on the solution. Do we need to wait till official Mojave release to get our testers through the provisioning portal? It seems there should be a workaround for this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide